Skip to content
Back to Glossary
Watch Anatomy

Case back

The rear cover of a watch case, screwed down, snapped on or held by screws, either solid metal or with a sapphire window. It seals the movement and often carries engravings, references or serial numbers.

The case back is the cover that closes the watch case from behind and protects the movement. It is one of the first things a dealer turns over at intake, because it tells you a lot about the watch's construction, originality and past.

Types you will see

  • Screw-down back. Threaded into the case, usually with notches for an opening tool. Common on sports and dive watches because it helps water resistance.
  • Snap-on back. Pressed into place and opened with a case knife. Typical for dress watches and many older pieces.
  • Screwed back. Held by several small screws around the edge, as on many Audemars Piguet and Panerai models.
  • Display back. A sapphire window that shows the movement. Lets you check the caliber without opening the watch.

What it means for a dealer

  • Intake check. Look at the engravings: brand, reference, sometimes serial and material marks. They should fit the model and era. Check the notches and edges for tool slips and scratches, which show how carefully the watch was opened before.
  • Personal engravings. Names, dates or dedications are common. Some buyers like the story, many do not. An engraving usually narrows the buyer pool; removing it by polishing changes the case.
  • Stickers. New or unworn watches sometimes still carry the factory sticker on the back. Its presence or absence is worth noting in the condition description, not a proof of anything on its own.
  • Opening. Only open a back with the right tool. After a back has been opened, have a pressure test done before you describe the watch as water-resistant.

Photograph the back for your records. If it shows the serial number, crop or cover that part before using the photo in a listing. In ChronoDesk, photos of the case back and papers can be used to add a watch: the AI reads reference and serial and the dealer confirms each field.

FAQ

Is a display case back original if the model normally has a solid one?

Sometimes brands offered both, sometimes the display back is an aftermarket swap. Check what the reference was delivered with before calling it original.

Can I open a screw-down case back myself to check the movement?

Only with the correct tool and if you accept the risk to the seal. Many dealers leave it to their watchmaker and request a pressure test after closing.

Related: water-resistance, pressure-test, reference-number, serial-number, caliber.

Last updated on 5 November 2026. Glossary entries are general editorial reference, not legal, tax, or financial advice. Rules differ by country and change over time; have your tax advisor or lawyer confirm your own case. See our disclaimer for the full notice.