Timegrapher
An electronic device that listens to the ticking of a mechanical watch and shows its rate in seconds per day, its amplitude and its beat error. Dealers use it at intake to judge whether a movement needs a service.
A timegrapher (German Zeitwaage) is a measuring device with a microphone that picks up the ticks of a mechanical movement. From the timing of each tick it calculates how the watch is running. A reading takes about a minute and needs no opening of the case, which makes it one of the most useful intake tools a dealer can own.
What it shows
- Rate. How many seconds per day the watch gains (+) or loses (-). For reference, COSC-certified chronometers must stay within -4 to +6 seconds per day in testing, see COSC.
- Amplitude. How far the balance wheel swings, in degrees. On many modern movements, roughly 250 to 310 degrees fully wound in the dial-up position is a healthy range; low amplitude often points to worn lubrication or a weak mainspring.
- Beat error. How evenly the balance swings to both sides, in milliseconds. Small values are normal; a large beat error can be corrected by a watchmaker.
- Beat rate. Set or detected automatically, for example 28,800 vibrations per hour.
How to get a reliable reading
- Wind the watch fully first. Readings on a nearly empty power reserve look worse than the movement is.
- Measure in several positions: dial up, dial down and crown positions. Large differences between positions show more than a single number.
- Enter the correct lift angle for the caliber. A wrong value distorts the amplitude, while the rate stays valid.
- A watch that suddenly runs very fast may be magnetised. Demagnetization often fixes it in seconds.
What it means for a dealer
A good reading supports the description "running well"; a poor one tells you to plan a service before sale or price it in. Keep the reading with the watch's records. In ChronoDesk, service work can be booked as a cost on the watch with its receipt, and a service certificate PDF can list the services done, date, technician and an optional warranty period.
FAQ
Does a good timegrapher reading mean the watch does not need a service?
No. It shows how the movement runs today. Old oils or worn parts can still be present, so the service date still matters.
Can I trust a cheap timegrapher?
For rate and beat error, most devices are useful at intake. For exact amplitude, the lift angle has to be right, and a watchmaker's measurement is the reference.
Related: regulation, power-reserve, cosc, demagnetization, service-history.