Skip to content
Back to Journal
Guides5 November 2026

Watch intake: authenticity and condition checks

A step-by-step intake check for a pre-owned watch. Identity, condition, set and papers, photos, red flags, when to call a watchmaker and how to document it.

Viktor Siewert
Viktor Siewert
Founder, ChronoDesk
Contentstap to expand

Short answer: every watch that comes in goes through the same five steps before it is priced or listed: confirm its identity (reference, serial, case back, movement where possible), grade its condition, record the set and the papers, photograph it, and look for red flags. Anything you cannot confirm yourself goes to a watchmaker or the manufacturer. Write down what you checked and what you found, because that record is what you rely on if a buyer or the police ask later.

Why a fixed intake routine

Most expensive mistakes in this trade happen in the first ten minutes with a watch: a replica taken in on trust, a replaced dial nobody noticed, a box that turns out to belong to another watch. A routine you follow for every piece, also the easy ones, catches most of them. It also gives every later step (pricing, listing, the invoice, the handover) one set of facts to work from.

Step 1: identity

Check that the watch is what it claims to be, and that its parts belong together.

  • Reference. On the case, between the lugs or on the case back, depending on brand and era. Compare with the model, dial and bezel you see. See how to read a watch reference number and reference number.
  • Serial. Read it on the watch, not only from the papers, and compare both. A serial that has been polished away or altered is a reason to stop. See serial number.
  • Case back. Engravings, markings and the fit of the back. A case back from another reference is a common shortcut in a frankenwatch.
  • Movement. Where you can open the watch, or have it opened, look at the caliber: does it match the reference, is the finishing right, are there signs of rough work?
  • Weight and feel. Compared with a known genuine example of the same reference, a big difference in weight, a gritty crown or a loose bezel are worth a second look.

Step 2: condition

Grade the watch the same way every time and write the grade down with a short note. See condition grading and describing watch condition.

  • Case and bracelet: scratches, dents, signs of polishing, stretch in the bracelet.
  • Crystal, dial, hands and lume: marks, moisture, discolouration.
  • Function: winding, setting, date change, chronograph, if it has one. A reading on a timegrapher tells you rate and amplitude in a minute.
  • Water resistance: only a pressure test tells you. Do not promise it without one.

Step 3: set and papers

Record exactly what comes with the watch. "Full set" means different things to different people, so list the items. See box and papers and full set.

  • Box, outer box, booklets, hang tags, extra links.
  • Warranty card or papers: does the serial on the card match the watch, does the dealer stamp and date make sense?
  • Service papers and invoices: they support the service history and the provenance.
  • The original purchase invoice, if there is one.

Papers can be forged as well. A perfect card on a watch with doubts does not settle the question.

Step 4: photos

Take the same set of photos for every watch: dial front, case sides, case back, clasp, serial and reference, every item of the set, and every flaw you noted. Good light, no filter. These photos are your record of the condition on the day you took it in, and most of them become the listing photos later.

Step 5: red flags

Stop and look again if you see any of these:

  • Replica signs. Wrong fonts, poor printing, a date window or cyclops in the wrong place, a movement that does not belong.
  • Frankenwatch. Genuine parts from different watches: a dial, bezel or bracelet that is not correct for the reference or the year.
  • Aftermarket parts. Diamond dials, bezels or bracelets that were never made by the brand. They change the value, often a lot.
  • Service dial and service hands. Not wrong, but they change the value of a vintage piece and must be named in the description.
  • The story. Papers that do not match the serial, a seller who cannot say where the watch comes from, a price far below the market.

When to involve a watchmaker or the manufacturer

Send the watch to someone who can open and test it when:

  • you cannot see the movement yourself, or what you see does not match the reference,
  • the value is high enough that one wrong call would hurt,
  • you suspect a replaced dial, hands or parts,
  • the buyer will ask for a written statement.

Some manufacturers issue an extract from the archives for older pieces, and a manufacturer service checks the watch as part of the work. Both take time and cost money, so plan them before you promise a delivery date.

How to document it

Write the intake down the day the watch arrives, in one place:

  1. Reference, serial, year, dial and variant.
  2. Condition grade and the notes behind it.
  3. Every item of the set and the papers.
  4. The photos.
  5. Who checked it, when, and what was sent to a watchmaker, with the result.
  6. The buying price, date, source and the purchase document.

Keep the serial out of anything public. Listings and feeds need the reference, not the serial.

How ChronoDesk helps

  • One watch record. Brand, model, reference (with autocomplete from the ChronoDesk watch database), serial, year, dial, variant, condition (new, like new, very good, good, used, fair, incomplete), scope of delivery with a free-text note, buying price, date and source, location and photos.
  • Reading from photos. Photograph the watch and its papers, or upload a PDF; brand, model, reference, serial, year, condition, set and buying price are read by AI, a duplicate check runs, and you confirm every field before it is saved.
  • Documents linked. Service bills, papers and the purchase receipt are stored with the watch. Uploaded documents are classified, and costs on a service bill are suggested for you to confirm.
  • History timeline. Every change on the watch is kept with who made it, the old and the new value, plus status and location changes, costs and service returns.
  • Serial stays private. The serial never appears in marketplace listings, the Chrono24 feed or custom export feeds.

See inventory.

FAQ

How do I check whether a watch is genuine?

Compare reference, serial, case back and movement with each other and with a known genuine example, check the papers against the watch, and look for the red flags above. If you cannot open the watch or still have doubts, a watchmaker or the manufacturer has the final word.

Is a service dial a sign of a fake?

No. A service dial is a genuine replacement dial fitted during a service. It changes the value of a vintage watch, so record it and name it in the description.

Should I record the serial number if it never goes public?

Yes. The serial ties the watch to its papers, to your purchase document and to any stolen-watch check. Keep it in the record and out of listings and feeds.

What if the papers and the watch do not match?

Treat it as a red flag. Ask the seller for an explanation and proof, and do not buy until it is cleared.

ChronoDesk is free for 60 days. See the plans.

Last updated on 5 November 2026. General information reflecting ChronoDesk’s understanding at the time of publication, not legal, tax, or financial advice. Rules differ by country and change over time, so have your tax advisor or lawyer confirm your own case before you act on it. See our disclaimer for the full notice.
Share
Tagsintakeauthenticityconditiondocumentationinventory